Skinny Stone Veneer Siding Natural Stone Cladding
We start with giant pieces of real stone gathered all through Massachusetts, Connecticut, Rhode Island, New Hampshire, Vermont and Maine. We then kind the stone by dimension, shape and coloration. Experienced stone craftsman cut up and sawn this pure materials into Stone Veneer for use in your subsequent architectural development challenge.
Thin Veneer is less than 1.Zero inch thick
Thin Veneer is installed or adhered on to the floor. It weighs less than 14 lbs/sf.
Details of Thin Veneer:
– Sawn pieces of stone
– 1 inch +/- zero.5″ thick
– Lower than 14 lbs/sf
– Doesn’t require a load bearing basis
– Sticks directly to the structure’s wall
Fieldstone veneer specifications
Why Use Thin Veneer
We start with the identical signature mix of stone. However, Thin Veneer allows natural stone to be used in purposes that do not incorporate a concrete footing to help the burden of traditional full thickness masonry stone. Thin veneer is commonly chosen for renovations on the siding of an present picket constructing, stone going through a fireplace, or to jazz stone island football hooligans up a concrete foundation.
Skinny veneer stone is on the market in each “flats” and “corners” in order that the finished product looks utterly reasonable — just as if full thickness stones had been used — but with lower transportation costs and site development bills. (Think about carrying eighty% less weight up your staging!)
This skinny stone cladding (facing) can be utilized over wooden siding. The bonding agent, installed by a professional mason, helps the load of the stone, which is less than 14 lbs per square foot. Our thin veneer stone is roughly 1 inch thick, and this allows your mason to safely recess the mortar joints a mean of a quarter inch if the project requires tightly jointed or mortar recessed masonry construction.
See our set up directions for extra details, but one thing we all the time advocate is a moisture management system to stop water damage to the substructure and to prevent efflorescence (white salt stains on the stone).
We noticed our Skinny Veneer from “regular” face sized building veneer. Three face shapes are weathered: Mosaic, Sq. & Rectangular, and Round, and our two stacked stones characteristic the inside grain of the stone: Ledgestone and Ashlar.